Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. It also provides superior protection for low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease is designed to deliver maximum protection in the intense environments found in racing applications. Its high-performance anti-wear additive package helps ensure maximum component life.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers excellent low-temperature pumpability and high-temperature consistency for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease offers excellent oxidation resistance and a robust package of oxidation inhibitors, helping to prevent grease breakdown and component surface damage in the high oxidizing conditions associated with high-temperature operation.
Friction Reduction
Because it effectively reduces friction, AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash-out and inhibits rust and other forms of corrosion.
Applications
AMSOIL Series 2000 Synthetic Racing Grease meets the highest performance standards of the National Lubricating Grease Institute; GC for wheel bearing applications and LB for chassis applications.
| Typical Technical Properties | ||
|
AMSOIL Synthetic Lithium Complex Racing Grease
|
Series 2000 Racing Grease | NLGI GC-LB |
| Thickener | Lithium Complex | NR* |
| NLGI Consistency Grade | 2 EP | NR* |
| NLGI Performance Grade | GC-LB | NR* |
| Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes | 265 - 295 | 220 - 340 |
| Dropping Point (ASTM D-566) °C [77° F] | 285 [545] | 220 [428] |
| Water Washout (ASTM D-1264) 79° C [175° F] % loss | 5.1 | 15 max |
| Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss | 2.8 | 10 max |
| Rust Protection (ASTM D-1743) | pass | pass |
| Timken OK Load Test (ASTM D-2509), lbs. | 60 | NR* |
| Fortified with Moly Compound | no | NR* |
| Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm | 0.32 | 0.9 max |
| Compatibility with other greases | excellent | NR* |
| Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf | 400 | 200 min |
| Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf | 65 | 30 min |
| High Temperature Life (ASTM D-3527) hours | 300 | 80 min |
| Fretting Wear (ASTM D-4170)* mg | 3.4 | 10 max |
| Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC | 21.6 | -5 to +30 |
| Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB | 9.88 | 0 to +30 |
| Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC | -3 | +2 to -15 |
| Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, LB | -6 | 0 to -10 |
| Leakage (ASTM D-4290), G* | 6.0 | 10 max |
| Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F] | 2.3 | 15.5 |
| Water Spray Off (ASTM D-4049), % max | 22.7 | NR* |
| * NR: Not Required for NLGI GC or LB labeling | ||